Why Quality Canica VSI crusher parts Matter for Production
Canica® is a renowned brand of Vertical Shaft Impact (VSI) crushers, owned by Terex‑MPS. These machines are extensively used in aggregates production, mining, industrial minerals processing, and construction recycling. Canica VSI crushers are particularly valued for producing high‑quality cubical manufactured sand and well‑shaped aggregate.
The equipment line includes three main configurations: Modular, Portable, and Static VSI units. They support several crushing modes – ROR (rock‑on‑rock), ROS (rock‑on‑steel), HD heavy‑duty, and HDS sand‑making – to suit different feed materials and production targets.
Because VSI crushers operate at high speeds with continuous impact and abrasion inside the chamber, Canica VSI crusher parts experience severe wear. The choice of replacement components directly affects plant uptime, product quality, and total cost per ton. Using substandard aftermarket parts can lead to rapid wear, rotor imbalance, and costly breakdowns. That is why selecting the right Canica VSI crusher parts with appropriate metallurgy is essential for reliable, long‑term operation.
Popular Canica VSI Crusher Models
Canica offers a wide range of models, from medium‑capacity to high‑tonnage heavy‑duty machines. The most common models that require aftermarket Canica VSI crusher parts include:
-
Canica 1400
-
Canica 2000 / MV2000
-
Canica 2050
-
Canica 2300 / 2350
-
Canica 3000 (up to 1000 tph capacity)
These models can be supplied as modular units, wheel‑mounted portable plants, or fixed static installations for quarrying, sand making, and recycling applications.
Key Canica VSI Wear Parts
Every component inside the rotor and crushing chamber is a consumable wear part. The main Canica VSI crusher parts that require regular replacement are:
-
Rotor tips & back‑up tips – These are the core wear items. They fling material at high velocity and endure both abrasion and impact. They wear out fastest and need frequent inspection and change‑out.
-
Anvils & anvil ring – Critical for rock‑on‑steel (ROS) mode, these components receive high‑speed rock impact to complete secondary crushing and shaping.
-
Feed eye ring & feed tube – Protect the feed inlet from continuous material impact, preventing premature damage to the rotor’s central structure.
-
Table liners, edge liners, and cavity wear plates – Shield the rotor housing and inner chamber walls from sliding abrasive particles, avoiding expensive structural damage.
-
Distributor plate / spreader plate – Evenly guides feed into the rotor. Incorrect wear or dimensional errors can cause balance issues and uneven consumption of other Canica VSI crusher parts.
-
Trail plates, retaining bars, and rotor hardware – Secure wear components inside the rotor and control material flow. Loose or worn fasteners may trigger severe rotor failure.
About Saikuang Casting
Saikuang Casting manufactures a complete range of aftermarket replacement Canica VSI crusher parts for all popular models, including Canica 1400, 2000, MV2000, 2050, 2350, 3000, and other series.
We supply full sets of Canica VSI crusher parts – rotor tips, back‑up tips, anvils, anvil rings, feed eye rings, feed tubes, table liners, edge liners, cavity wear plates, distributor plates, trail plates, and associated rotor fasteners. All components are available in multiple material grades: high‑chrome iron, high‑manganese steel, martensitic steel, and ceramic‑insert MMC composites.
Every product is cast to original drawing dimensions, ensuring a direct fit without extra modifications during installation. We maintain strict quality control – from raw material chemical inspection and casting processes to final heat treatment and hardness testing. Batch‑traceable material certificates are available upon request.
By choosing Saikuang as your partner for Canica VSI crusher parts, you can reduce unplanned downtime and lower your real cost‑per‑ton. We support both single‑piece trial orders and large‑volume bulk purchases.
Canica VSI Parts: OEM vs Saikuang Material Solutions
For Canica VSI crusher wear parts, different material grades bring different service life and crushing performance. The table below compares standard OEM material specifications and upgraded material solutions offered by Saikuang Casting. We provide improved‑grade options to extend part lifespan for high‑abrasive working conditions.
Wear Parts for VSI (Vetical Shaft Impactor )
| Item No. | Name | OEM Material | SAIKUANG offer better solutions |
| 1 | Anvil | High chrome 26%with or without ceramic | High chrome 26% with ceramic,Or with tungsten carbide |
| 2 | Impeller Shoes | High chrome 26%with or without ceramic | High chrome 26% with ceramic,Or with tungsten carbide |
| 3 | Feed disk | High chrome 20% or 26% | High chrome 28%with or without tungsten carbide |
| 4 | Table liner | High chrome 20% or 26% | High chrome 28%with high hardness |
| 5 | Edge liner | High chrome 20% or 26% | High chrome 28%with high hardness |
Contact Us for Reliable Canica VSI Crusher Parts
If you need high‑quality Canica VSI crusher parts for your crushing plant, please reach out to us for technical advice and a formal quotation.
Email: infosk@skpremiumcasting.com
Tel: 0086‑17351780508
