About Canica 2000 VSI Crusher 

Canica is a well‑known vertical shaft impact crusher brand under Terex‑MPS. Canica VSI machines are widely used for aggregate shaping, manufactured sand making and waste material recycling across quarries and mines worldwide. 

The Canica 2000 VSI series includes 2000SD single‑drive and 2000DD dual‑drive models. It supports multiple crushing modes: HD heavy‑duty, HDS sand‑making, rock‑on‑rock and rock‑on‑steel. It can reach output up to 350 tph for hard rock and sand production. 

Because the crusher runs at very high rotor speed, internal components suffer continuous heavy impact and abrasive wear. Using qualified replacement wear parts keeps stable output and avoids costly unplanned shutdowns.

Main Wear Parts for Canica 2000 VSI

• Anvils HD (Part No. CR023823501000): Heavy‑duty anvil for rock‑on‑steel crushing, takes repeated high‑velocity rock impact.

• Impellers (Impeller shoes, Part No. CJ04431‑832): Core rotor wear parts, throw feed material at high speed.

Anvils HD CR023823501000 and Impellers CJ04431‑832 are the most frequently replaced consumables. Their service life directly influences the whole plant’s running cost.

Terex Canica 2000 VSI Crusher Parts including:

Part Number	Description	Crusher Type
CJ250039	Adjustment Kit	Canica 2000
CJ08700-340-53L	Liner lower	Canica 2000
CJ08700-340-17	Rotor tip	Canica 2000
CJ08700-340-53U	Liner upper	Canica 2000
CJ04431-848	Wear Plate UPR/LO	Canica 2000
CJ08700-340-05	Wall Plate,Alloy	Canica 2000
CJ08700-340-27	Top Wear Plate	Canica 2000
CJFT0400	Feed Tube	Canica 2000
CR023823501000	Anvil	Canica 2000
CJ04431‑832	Impeller	Canica 2000
CJ08700-340-08	Rotor Edge Liner	Canica 2000
CJ08700-340-09	Washer	Canica 2000
CJ8506-C	Impeller	Canica 2000
CJER-51 / ER-51	Edge liner	Canica 2000
CJ04431-850C	Distributor Plate	Canica 2000
ER-25	Feed Disc	Canica 2000
CJ300095	Anvil Ring	Canica 2000
C95VA / CJC95VA	Anvil	Canica 2000

Material Options for Canica 2000 VSI Wear Parts

Below table lists main VSI wear‑parts, original OEM material grades and upgraded material solutions supplied by Saikuang Casting. We offer improved high‑chrome, ceramic and tungsten carbide reinforced options to extend service life for vertical shaft impactor crushers.

Wear Parts for Canica 2000 VSI Crusher parts

Item No.	Name	OEM Material	SAIKUANG offer better solutions
1	Anvil	High chrome 26%with or without ceramic	High chrome 26% with ceramic,Or with tungsten carbide
2	Impeller Shoes	High chrome 26%with or without ceramic	High chrome 26% with ceramic,Or with tungsten carbide
3	Feed disk	High chrome 20% or 26%	High chrome 28%with or without tungsten carbide
4	Table liner	High chrome 20% or 26%	High chrome 28%with high hardness
5	Edge liner	High chrome 20% or 26%	High chrome 28%with high hardness

Saikuang Casting Supply & Advantages

Saikuang Casting manufactures full‑range aftermarket replacement parts for Canica 2000SD and 2000DD VSI crushers. We can produce Anvils HD CR023823501000 and Impellers CJ04431‑832, as well as other complete VSI wear components.

Our core strengths

1. Competitive price
   We are a direct casting foundry without middle dealers. Our aftermarket spare parts offer obvious cost advantages compared with original OEM parts.

2. Strict casting and heat‑treatment process
   Every part goes through raw material inspection, precision casting, heat treatment, hardness test and dimension inspection. Strict quality control guarantees stable performance batch by batch. All replacement parts keep the same dimensional tolerance, so they fit perfectly on Canica 2000 crusher without on‑site modification.

3. Flexible material solutions
   We provide high‑chrome, ceramic composite and tungsten carbide reinforced grades. We can adjust alloy formula according to your real‑site raw material. Custom‑made service is available for special requirements.

4. One‑stop sourcing & technical support
   We supply the full set of Canica 2000 VSI wear parts. You can get all required consumables from one supplier. Material test reports can be provided upon request. Our engineering team can also give professional material selection advice based on your crushing conditions.

Conclusion

High‑quality Canica 2000 VSI crusher parts such as Anvils HD CR023823501000 and Impellers CJ04431‑832 play a key role in your sand‑making and aggregate‑shaping plant.

If you are looking for reliable aftermarket replacement parts for Canica 2000 VSI crusher, please feel free to contact Saikuang Casting. Send us your part numbers, drawings or working‑condition information, we will offer you a competitive quotation and professional technical support.

Your Reliable Partner for Crusher Spare Parts

Email: infosk@skpremiumcasting.com

Tel: 0086-17351780508