About Trio TV65 VSI Crusher Parts
Trio® is a well‑known crushing equipment brand under the Weir Group. Its TV series vertical shaft impact crushers are widely used for aggregate shaping, manufactured sand making, mineral processing and construction waste recycling. The Trio TV65 is one of the popular mid‑size VSI models. It can run under rock‑on‑rock and rock‑on‑steel working modes to produce high‑cubical‑quality finished sand and aggregates.
Because the TV65 VSI crusher runs at high rotor speed, internal components keep suffering heavy impact and continuous abrasive wear from raw rock materials. Worn‑out VSI parts will cause unstable output, poor particle shape, frequent downtime and higher operation cost. Selecting high‑quality Trio TV65 VSI crusher wear parts is critical for your whole crushing plant.
Main Wear Parts for Trio TV65 VSI Crusher
A full set of consumable components for Trio TV65 includes these key items:
| Trio TV65 VSI Crusher Parts | |
| Part No. | Part name |
| LVR654.1 | PROTECTION PLATE |
| LVR654.2 | Bushing |
| LVR654-3 | Lock bushing |
| LVR654.3 | Tungsten Tip |
| LVR654.4 | Rotor Frame |
| LVR654-1 | CENTER DISTRIBUTOR |
| LVR654-2 | FEED EYE RING |
| LVR654-4 | base plate |
| LVR654-5 | Liner |
| LVR654-6 | OUTSIDE VERTICAL WEAR BAR |
| LVR654-7 | base plate |
| GB70.3 | Bolt |
| GB97.1 | Washer |
| GB56 | Nut |
| GB5787 | Bolt |
| GB70.3 | Bolt |
| GB5783 | Bolt |
| GB5783 | Bolt |
| GB70.1 | Bolt |
| GB70.1 | Bolt |
| LV654-3 | Rubber washer |
| LV654.10 | |
| GB13575.2 | V belt |
| LV654.4-1 | FEED TUBE |
All these parts need regular inspection and timely replacement during daily operation.
Material Options for Trio TV65 VSI Wear Parts
Different working conditions can choose corresponding casting materials to balance service life and cost‑per‑ton performance:
-
High chrome 26% with ceramic, or with tungsten carbide：26% high‑chrome base added with ceramic or tungsten carbide particles. Greatly improves anti‑abrasion performance, suitable for highly abrasive hard rock, extends service life of rotor tips and liners.
-
High chrome 28% with high hardness：Higher chromium content delivers superior surface hardness. Perfect for harsh sand‑making conditions with sharp, abrasive feed materials.
-
High manganese steel：Excellent toughness and work‑hardening performance, suitable for heavy‑impact feeding and large‑size raw material.
-
Martensitic / Ceramic Martensitic alloy: Stable hardness, balance of impact and wear resistance, works well in mixed‑material recycling projects.
Saikuang Casting Supply for Trio TV65 VSI Crusher Parts
Saikuang Casting can supply full‑range aftermarket replacement wear and spare parts for Trio TV65 VSI crusher. We can produce parts matching original part numbers such as LVR654.3 tungsten tips, LVR654‑2 feed eye ring, protection plates, wear bars and other related components.
Our Advantages
-
Competitive price: We are a direct casting foundry without middle dealers. Our aftermarket spare parts offer obvious cost advantages compared with original OEM parts.
-
Strict dimension control, good interchangeability with original components, easy for on‑site installation.
-
Complete quality inspection including hardness test, material analysis and casting defect detection.
-
Besides Trio TV65 VSI crusher parts, we also provide wear spares for other Trio TV series VSI machines, as well as VSI wear parts for Metso Barmac, Canica, Magotteaux and other mainstream VSI crusher brands.
If you are looking for reliable replacement Trio TV65 VSI crusher parts, welcome to contact Saikuang Casting for drawings, quotations and technical support.
Your Reliable Partner for Crusher Spare Parts
Email: infosk@skpremiumcasting.com
Tel: 0086-17351780508
