What Is the Metso Barmac VSI Crusher Parts?
The Metso Barmac B-Series VSI is a well-known vertical shaft impact crusher used in the aggregate and mining industries. It can work in two crushing modes: rock-on-rock and rock-on-metal. These modes help produce high-quality cubical manufactured sand and well-shaped aggregate.
The main models for Barmac VSI Crusher Parts are B6150SE, B7150SE, and B9100SE. They are available in stationary, portable, and mobile versions.
These crushers are widely used for sand making, rock shaping, mineral processing, and construction waste recycling. During operation, the internal parts constantly hit and rub against hard stones. Over time, these wear parts become thin or develop cracks. If you do not replace them in time, production output will drop, or the crusher may stop unexpectedly. Good-quality Barmac VSI crusher parts are essential for keeping your plant running smoothly.
Main Wear Parts for Metso Barmac VSI Crusher Parts
Saikuang Casting – with over 20 years of experience – supplies a full range of replacement parts for Metso Barmac VSI crushers. The parts are grouped by function as follows:
1. Rotor Assembly
-
Rotor body, shaft, spider, spreader plate, distributor plate, and rotor weldment – these form the main rotating structure that throws material.
-
Rotor tips and back‑up tips – these directly hit the rock and wear out fastest. They need frequent replacement.
2. Feeding System
-
Feed hopper, feed tube, and feed eye ring – these guide raw material into the rotor center and protect the feed inlet from strong impact.
3. Wear Protection Plates
-
Top wear plate, lower wear plate, tip/cavity wear plate, gusset wear casting, and upper/lower/cavity wear plates – these cover the rotor body and crushing chamber to reduce abrasion and extend the life of the crusher.
4. Anvils and Anvil Ring
-
Used in rock‑on‑metal crushing mode. They provide a fixed impact surface for shaping and fine crushing.
5. Flow Guides and Fasteners
-
Trail plates and retaining bars – these direct material flow inside the crusher and help keep the rotor assembly stable.
-
Distributor bolts – these secure the distributor plate to the rotor.
All these Barmac VSI Crusher Parts directly affect crusher output, product shape, and operating costs. Worn parts cause unplanned downtime, so timely replacement is essential for smooth production.
Metso Barmac VSI Crusher Parts including:
| Part Number | Description |
| B802S3000A/V | Shaft assembly B7150SE |
| B962S3051A | Lower seal kit B7150SE |
| MM0308785 | Cylinder roller bearing B7150SE |
| B812S9420B | Rubber assembly B7150SE |
| B812S7420C | Holder B7150SE |
| MM0401052 | Lower wear plate B7150SE |
| MM0401051 | Upper wear plate B7150SE |
| MM0401058 | Wear plate assembly B7150SE |
| MM0401063 | Wear plate tip set B7150SE |
| B96394007A | Taper rotor lock B7150SE |
| B812S8410A | Wear ring B7150SE |
| B812S7440C | Wear ring B7150SE |
| MM0401066 | Wear plate set B7150SE |
| B913S9441A | Spreader plate B7150SE |
| MM0401053 | Cam lock upper B7150SE |
| MM0401056 | Cam lock lower B7150SE |
| B812S8411A | Wear ring B7150SE |
| B812S7401C | Spider B7150SE |
| FE-4414705 | Wear Plate B7150SE |
| MM1234905 | Rotor tip set B7100SE |
| B7R2S9400A | Hopper Assembly B7100SE VSI |
| B90334106G/W | Rotor B7100SE VSI |
| B96394150O/B | Cavity Wear Plate Bolt Set |
| B90394055B | Trail Plate（RC840） |
| B90394060A | BACK Tip（RC840） B9100SE VSI |
| B96394060B | Trail Plate Set（RC840） |
| B962S7040B | Feed Tube |
| B96334030E | FEED EYE RING |
| B96334135A | Upper Wwear Plate（RC840） |
| B96334140A | Lower Wear Plate（RC840） B9100SE B9600 VSI |
| B96334170C | TOP WEAR PLATE SET （RC840） B9100SE VSI |
| B96334180A | Lipped Bottom Wear Plate B9100SE VSI |
| MM0255209 | Pin spring slotted B9100SE VSI |
| B96394172A | Top Wear Plate Bolt Set |
| B96394049O | Rotor Tip（RC840） |
| B96394120E | Distributor（RC840） B9100SE B9600 VSI |
| B96394025A | Distributor Plate Bolt |
| B96394150N | Cavity Wear Plate |
| B96394150O | Cavity Wear Plate（RC840） |
| В69274120С | Rotor distribution cone |
| B69274030F | Power Ring |
| В69274135А | Set of upper wear plates |
| B69274140A | Lower wear kitplates |
| B96394055B | Set of profile plates (3 pieces) |
| B69274170D | Upper protective disc B6150 VSI |
| B96394025B | Bolt B6150 VSI |
| B96394048P | Tip B6150 VSI |
| B962S5026A | Swing bolt roof B6150 VSI |
| В61274180А | Lower wear disk |
| B96394182A | Bolt |
| B70274105M | Rotor assembly |
| B702S7040A | Feeder system pipe |
| B611S7400B | Spider knot assembly |
| B611S6400B | Cavity Ring Assembly |
| B691S3002B | Shaft |
| B702SH300B/S | cylinder hydraulic B9100SE VSI |
| B611S2430B | Cladding kit |
| ММ0407475 | Rotor |
| B96394120F | Distributor |
| 7001530521 | Hex bolt |
| B69274120C | Distribution cone |
| MM0401067 | Retaining Bar B7150SE |
| MM0401068 | Back Up Tip Set B7150SE |
| MM1074295 | Top Wear Plate RC840 |
| MM1173845 | Bottom wear plate set |
| MM1074292 | Bottom Wear Plate RC840 |
| MM0401057 | Lower Wear Plate Wedge |
| MM0401054 | Upper Wear Plate Wedge B7150SE |
| B903X2035A/R | Bottom Liner B9100 |
| B903X2032A | Liner B9100 |
| B903X2031C/R | Bottom Liner B9100 |
| B903X2031C/L | Bottom Liner B9100 |
| B903X2033A/R | Liner B9100 |
| B903X2035A/R | Bottom Liner B9100 |
| B903X2033A/L | Liner B9100 |
| B903X2038C/L | Bottom Liner B9100 |
| B903X2038C/R | Bottom Liner B9100 |
| B963X2022B | Gusset Wear B9100 |
| B963941500/B | TIP CAVITY WEAR PLATE BOLT |
| B913S5416A | Stop bar |
| B802S3002C | Mainshaft B7150SE |
| MM0382112 | Ball bearing |
| MM0308782 | Bearing B7150SE |
| B802S300B/V | B7150SE |
| B90AP90B | Vibration Damper Set B7150SE |
| B96334170B | Top Wear Plate |
| B96394008A | Top Plate |
| B96394013A | Bolt In Rotor Boss |
| B96394015A | Rotor Boss Bolt Set B9100SE B9600 VSI |
| B96394009B | Top Plate Bolt Set B9100SE B9600 RC840 VSI |
| B96394009A | Bolt Set |
| B90334105M | Rotor |
| B90394055A | Trail Plate Set B9000 VSI |
| B90AP91 | Rubber cushion B9000 VSI |
| B812S7400C | Spider assembly B8100 VSI |
| B812S5421A | Ring toe ring B8100 VSI |
| B913S9440A | Spreader plate kit B9100 VSI |
| B812S5420A | Ring toe ring kit B7150SE VSI |
| B712S5410A | Bolt set |
| B962S3050A | Seal kit B9600 VSI |
| B962S3005A | Bolt set |
| B962S3018A | Bolt set |
| B802S3060B | Sensor kit |
| MM0402127 | Connection cable |
| B9R3SR418B | Bolt assembly B7150SE VSI |
| B712S6400C | Seal cavity ring assembly B7150SE VSI |
| B712S5471E | Plate B7150SE VSI |
| MM0407475 | Rotor basic B7150SE VSI |
| B812S7441C | Protection skirt B7150SE VSI |
| B96394050G | Wear plate set B7150SE VSI |
| MM1108816 | V belt B7150SE VSI |
| MM0308706 | O ring B7150SE VSI |
| MM0315463 | O ring B7150SE VSI |
| B712S2430E/M | Liner plate B7150SE VSI |
| B802S3001A | Bearing housing B7150SE VSI |
| В962S3012A | Spacer B7150SE VSI |
| MM0274109 | Pulley V belt B7150SE VSI |
| 406202557760 | Bushing B7150SE VSI |
| MM0235555 | Bushing B7150SE VSI |
| B962S3003A | Bearing B7150SE VSI |
| B962S3014A | Thrust bearing B7150SE VSI |
| B96394049S | Tip set B7150SE VSI |
| B913S7430D | Feed kit assembly B7150SE VSI |
| B963S3050A | Top seal kit B9100SE B9600 VSI |
| B913S9411B | Cascade sheild B9100SE VSI |
| B913S9430B | Arm guard kit B9100SE VSI |
| B913S9470B | Control gate set B9100SE VSI |
| B913S9452C | Control plate B9100SE VSI |
| B913S9452E | Control plate B9100SE VSI |
| B96394007B | Lock, taper B9100SE B9600 VSI |
| B9R3S5400C | Crushing cavity assembly B9100SE VSI |
| B913S5420A | Toe ring set B9100SE VSI |
| B903X2030E | Liner kit B9100SE VSI |
| B962S5002B | Swing bolt kit B9100SE VSI |
| B903X2039A | Screw Set B9100SE VSI |
| B913S7432B | Feed plate B9100SE VSI |
| B913S7433A | Feed clamp plate B9100SE VSI |
| B913S7434A | Spring handle B9100SE VSI |
| B96334135A | Upper wear plate set B9100SE VSI |
| B96394052 | Bolt B9100SE VSI |
| MM0308646 | O ring B9100SE VSI |
| MM0301952 | Seal B9100SE VSI |
| B913S6403C | Bolt set B9100SE VSI |
| MM0252866 | Nut cap B9100SE VSI |
| MM0407477 | Rotor assembly B9100SE VSI 990DTR |
| B962S5027A | Swing bolt roof B9600SE VSI |
| B962S1051A | Coupling plate B9600SE VSI |
| B691S1052A | Rod adjuster B9600SE VSI |
| B962S1014A | Nut adjuster B9600SE VSI |
| B962S3004B | Retaining ring B9600SE VSI |
| B962S3006C | Seal top seal plate B9600SE VSI |
| B962S3011A | Retaining ring B9600SE VSI |
| B962S3013A | Spacer B9600SE VSI |
| B962S3015A | Lower retaining ring B9600SE VSI |
| B962S3016A | Plate lower seal B9600SE VSI |
| B962S3017A | Bottom cover B9600SE VSI |
| MM0308779 | Nut B9600SE VSI |
| MM0308781 | Washer B9600SE VSI |
| B962S3023B | Key plate B9600SE VSI |
| B962S3025A | Key plate B9600SE VSI |
| B962S3026A | Key plate B9600SE VSI |
| B962S1018A | Kit bracket support B7150SE VSI |
| MM0321347 | Cone sleeve B7150SE VSI |
| MM0318184 | Drive belt B7150SE VSI |
| B962S2003A | Ring taper top B7150SE VSI |
| B962S2004A | Ring taper bottom B7150SE VSI |
| B962S2005A | Bottom taper ring inner B7150SE VSI |
| B812S8410A | Wear ring B7150SE VSI |
| 7001630020 | Lock washer B7150SE VSI |
| N01548258 | Set screw B7150SE VSI |
| 7001530426 | Screw hex B7150SE VSI |
| N01563024 | Nut hex B7150SE VSI |
| B913S1440A | Bolt assembly B7150SE VSI |
| MM0253621 | Screw hex B7150SE VSI |
| 7001530417 | Screw hex B7150SE VSI |
| 7001626020 | Washer B7150SE VSI |
| B913S9452D | Control plate B7150SE VSI |
| B812S9452F | Control plate B7150SE VSI |
| B902SH322B | Hydraulic Fitting B7150SE VSI |
| B913SH401A | Hydraulic Hose B7150SE VSI |
| B962S7040B | Feed tube B7150SE VSI |
| B963334030E | Ring B7150SE VSI |
| B96394049G | Tip set B7150SE VSI |
| B963941150N | Wear plate B7150SE VSI |
| B61274180A | Wear plate bottom B6100 VSI |
| B96394049Q | Tip set B6100 VSI |
| B611S9400A | Feed hopper B6100 VSI |
| B69274030F | Wear ring B6100 VSI |
| B69274135A | Upper wear plate set B6100 VSI |
| B69274140A | Lower wear plate set B6100 VSI |
| B691S7040A | Feed tube B6100 VSI |
| B702S7040A | Feed tube B6100 VSI |
| B812S5403A | Rubber strip B6150SE VSI |
| B913S7410A | Bolt set B6150SE VSI |
| B69274105K | Rotor Assembly B6900 VSI |
| B96334106F/W | Rotor Welded Body B7150SE VSI |
| B96394255F | Trail Plate Tungsten Edge B6100 VSI |
| B69274030E | Feed Eye Ring Bolt on B6100 VSI |
| B611S8400C | Roof Assembly B6100 VSI |
| B611S1430A | Belt Guard Assembly B6100 VSI |
| B611S1411A | Motor Mount B6100 VSI |
| B7M2S9431A | Arm Guard B7150SE VSI |
| MM0407480 | Rotor Assembly B7150SE VSI |
| B96394030E | Feed Eye Ring B9600 VSI |
| B96394135A | Upper Wear Plate B9600 VSI |
| B96394140A | Lower Wear Plate B9600 VSI |
| B96394180A | Lipped Bottom Wear Plate Set B9100SE VSI |
| B96394170C | Top Wear Plate Kit B9600 VSI |
| B963S3000A/V | Shaft Line Assembly B9600VSI |
| B913S7401C | Spider Frame B9600VSI |
| B9R3SR451B | Hose Assembly B9600VSI |
| B611S4CB | Shaft Line Assembly B6150SE VSI |
| B691S3000A/V | Shaft Line Assembly B6150SE VSI |
| MM1353270 | Back Up Tip Set B7150SE VSI |
| MM1353609 | Back Up Tip Set B7150SE VSI |
| MM1740941 | Shaft Assembly B7150SE VSI |
About Saikuang Casting – Your Reliable Supplier
Saikuang Casting is a professional manufacturer of replacement parts for Barmac VSI Crusher Parts. We supply direct-fit spare parts for B6150SE, B7150SE, B9100SE, and other B-Series VSI crushers.
For anvils and impeller shoes, we offer optimized 26% high chrome material with optional ceramic or tungsten carbide composite treatment. Our high-chrome plus ceramic composite solution delivers outstanding wear resistance and service life, comparable to Magotteaux Xwin® and neoX® series, greatly outperforming standard OEM spare parts.
For feed disks, table liners and edge liners, we upgrade the traditional 20%–26% high chrome formula to 28% high chrome with higher hardness and better overall stability, with optional tungsten carbide reinforcement for feed disks.
In addition, we specially supply alloy steel wear plates that feature excellent wear resistance and outstanding impact toughness, effectively solving the cracking and abrasion problems of conventional high-chrome parts under harsh working conditions.
| Item No. | Name | OEM Material | SAIKUANG offer better solutions |
| 1 | Anvil | High chrome 26% with or without ceramic |
High chrome 26% with ceramic, Or with tungsten carbide |
| 2 | Impeller Shoes | High chrome 26% with or without ceramic |
High chrome 26% with ceramic, Or with tungsten carbide |
| 3 | Feed disk | High chrome 20% or 26% | High chrome 28% with or without tungsten carbide |
| 4 | Table liner | High chrome 20% or 26% | High chrome 28% with high hardness |
| 5 | Edge liner | High chrome 20% or 26% | High chrome 28% with high hardness |
Professional Support – Barmac VSI Crusher Parts
We control quality from raw material inspection to finished casting. Our replacement parts help customers cut equipment downtime and lower total operation cost.
If you need reliable metso barmac vsi crusher parts for your crushing plant, welcome to contact Saikuang Casting. We support both small single‑piece orders and large bulk orders.
Contact Saikuang Casting to get quotations and technical parameters if you need reliable Metso Barmac VSI Crusher Parts with fast sending service.
Your Reliable Partner for Crusher Spare Parts
Email: infosk@skpremiumcasting.com
Tel: 0086-17351780508
