0086-17351780508
infosk@skpremiumcasting.com

VSI Crusher Parts

What are the VSI parts?

The rotor, being the heart of the Vertical Shaft Impactor (VSI), is designed for high capacity with low power consumption. The wear parts for a VSI rotor are contained both within and on the outer surfaces of the rotor. Different parts have material technology to resist either impact or abrasive wear. The selection of the correct wear parts for the application required is fundamental to ensuring the desired performance.

SAIKUANG Casting holds a vast stock inventory of premium-quality aftermarket spare parts and wear parts to suit a popular range of VSI, including: Metso Barmac B Series, Sandvik CV Series, Trio TV Series, Terex Canica Series

Wear Package for VSI

Vsi-1
Vsi-2
Item No. Name OEM Material SAIKUANG offer better solutions
1 Anvil High chrome 26%
with or without ceramic		 High chrome 26% with ceramic,
Or with tungsten carbide
2 Impeller Shoes High chrome 26%
with or without ceramic		 High chrome 26% with ceramic,
Or with tungsten carbide
3 Feed disk High chrome 20% or 26% High chrome 28%
with or without tungsten carbide
4 Table liner High chrome 20% or 26% High chrome 28%
with high hardness
5 Edge liner High chrome 20% or 26% High chrome 28%
with high hardness

Why SAIKUANG Casting VSI Parts?

SAIKUANG Casting VSI parts are trusted by VSI operators all over the world due to their 100% adaptability and the same quality as OEM parts.

Affordable prices with on-time delivery allow you to easily arrange the ordering cycle and a reliable supply chain to keep your project stable.

SAIKUANG Casting spare parts bring you benefits by premium wear life and service life, our wearing parts minimize the downtime of your machines, thus to reduce the cost per ton.

We keep vast wear parts for the rotors of the Metso, Sandvik VSI in stock. They can be shipped within 3 days at the earliest to meet your urgent requirements.

Geniune Alternative Wear Parts
VSI parts made by SAIKUANG Casting

SAIKUANG Casting guarantees 100% part adaptability, whether for OEM replacement parts or custom products. Common models we can support are: Metso Barmac Series, Sandvik CV Series, Trio TV Series, Terex Canica Series…

We supply precision machined bronze and steel bushings, including: Eccentric, Eccentric bushing, Socket liner, Upper and lower head bushing, Spider bushing, Bottom shell bushing, Step bearing plates, Countershaft bushing, etc.

Common supporting ranges:

  • Metso Barmac Fully Dressed Rotor: 500, 690DTR, 840STD, 840DTR, 990STD, 990DTR and the RC new orange series rotors;
  • Sandvik CV Fully Dressed Rotor: 73EP, 73LP, 85HP;
  • Canica Enclosed Rotor and Impeller Table; CA65/1400, CA80/90/2000, 100/2050, CA90/100/105/2000, CA90/100/2000, CA100/2500, CA100, CA100, CA105, CA105, CA105, CA155, CA155, CA80/90/2000 Rotor 32″, CA80/90/2000 Rotor 32″, CA80/90/2000 Rotor 32″, CA80/90/2000 Rotor 32″, MAG2100, MAG2100, MAG2100/2400, MAG2100/2400, MAG2100, MAG2400, MAG2700, MAG2700, MAG2700
  • Trio TV Fully Dressed Rotor;
  • For rotors from other models or brands, please contact us for confirming or customization.